OPENBOX F-500 (горить boot, зависає)

[Andbiz]

Цей лог був отриманий в програмі STiControl 0.50 при попередній прошивці на попередній флешці:

reset system
reset TAP controller
reset TAP state machine
read device ID code
device ID code = 0x1D405041
device -> STi5518, Rev. 1
install trap handler code
setup trap handler data
setup memory interface
dcu=00000000
force trap exception
trap handler installed successfully
setup EMI configuration
reading device cut id code
device cut id code = 0x41
reading flash id code
flash id: manuf/dev: 0020/2249, (FA25/2532)
flash size: 2MB
memtype: FlashPROM    (7FE00000..7FFFFFFF)
saving FlashPROM image to file
FlashPROM image saved successfully
loading flash image file
beginning flash erase
flash erase finished
programming FlashPROM
programming FlashPROM finished
verifying FlashPROM data
verifying FlashPROM data finished OK

Тоді і зараз я використовую для запису jKeys_2.9.11.